Get started

Launch your first token

Everything you need to go from idea to a live, protected token. It's free, it takes about a minute, and there are no settings you can get wrong.

Launching costs $0

You only pay gas. Opening a market carries no protocol fee — Updraft earns from its share of the pool fee once your token trades.

1. Fund your wallet

You need a little gas, plus whatever you want for your optional first buy. If your funds are on HyperEVM, the Fast Bridge moves them over in a few seconds with no fee.

Fast BridgeHyperEVM → Elysium · 0% fee · ~3 seconds

2. Fill in the basics

Only the name and ticker are required. Everything else about the pool is fixed for every launch, so buyers always know the rules.

Field	Required	Notes
Name	Yes	Up to 32 characters. Shown everywhere your token appears.
Ticker	Yes	2 to 10 letters or digits. Permanent once launched.
Image	Recommended	PNG, JPG, GIF or WebP under 2MB, or an https / ipfs link.
Pair asset	Default USDC	USDC on Elysium, ETH on Robinhood Chain, a stock, or up to 5 quotes.
Pool fee	Default 3%	2%, 3%, 4% or 5%. Frozen at launch.
Agent mode	Optional	Routes your 10% creator stream into $GUST compute.
First buy	Optional	Buy in the same transaction, before anyone else.

3. Launch and share

Hit launch and confirm in your wallet. Your token is tradable within one block. Under the hood, the factory deploys the token, its pool and its treasury in a single call:

UpdraftFactory.sol

factory.createToken(
  "Thermal", "THERMAL",       // name, ticker
  metadataURI,                // image, description, links
  creator,                    // receives the 10% creator stream
  30000,                      // 3% pool fee, frozen
  []                          // optional burn sinks (max 3)
);  // → token, treasury, locked v4 position

Tickers and images are permanent

Double-check spelling before you confirm. None of the metadata can be edited after the transaction confirms — nobody, including us, can change it later.

What the transaction does

All of it happens, or none of it does.

Deploy the token. An ERC-20 with 18 decimals and a fixed supply of 1,000,000,000. There is no mint function, no owner, and no transfer restriction other than the rebate rules. A sale or a send to a normal wallet disqualifies that wallet from future rebates. A burn to the dead address does not.
Create the pool. A Uniswap v4 pool, no hook, tick spacing 10. The fee in the pool key is the fee you froze: 2%, 3%, 4%, or 5%, written as 20000, 30000, 40000, or 50000. The default is 3%.
Place the whole supply. One liquidity position, initialised so the market cap is about $5,000. The position holds tokens and no quote. See The open.
Lock the position. The NFT goes to UpdraftLocker. Collecting fees is a decrease of zero liquidity, which is how Uniswap pays owed fees without touching the principal. The locker has no function that transfers the position out or removes that liquidity.
Bind a treasury. That treasury is this token’s only. The 30/30/15/15/10 split is copied in and does not change. The creator / agent recipient is required. The zero address is rejected.

An optional buy can be included in the same transaction. That is the only buy guaranteed to be first. There is no snipe tax and no trading delay. Other wallets can buy in the same block or the next one.

Which pool you open

One pair

On Elysium you can launch against native $HYPE (1-click, no approve), 6-decimal USDC, kHYPE, or $KNTQ.

Phase 2: upTICKER Equity Pairs

On Elysium, upTICKER stock pairs (upNVDA, upOPENAI, upSPCX, upANTHROPIC) unlock per ticker in Phase 2 as Updraft Treasury acquires real underlying equities from protocol fees, locks them 1:1 in UpdraftStockVault.sol, and seeds deep $HYPE / upTICKER v4 reference pools.

Several quotes

A multi launch opens up to five pools in one transaction and splits the supply evenly. Each pool opens at the same price, so the token has one opening market cap, spread over several books.

What you can change later

Almost nothing. The fee, the quotes, the metadata, and the lock are fixed. The current creator / agent recipient can hand that role to a new address. Fees still sitting in the pool follow the new address. Updraft Labs cannot seize it or redirect it.

Get started

Launch your first token

Everything you need to go from idea to a live, protected token. It's free, it takes about a minute, and there are no settings you can get wrong.

Launching costs $0

You only pay gas. Opening a market carries no protocol fee — Updraft earns from its share of the pool fee once your token trades.

1. Fund your wallet

You need a little gas, plus whatever you want for your optional first buy. If your funds are on HyperEVM, the Fast Bridge moves them over in a few seconds with no fee.

Fast BridgeHyperEVM → Elysium · 0% fee · ~3 seconds

2. Fill in the basics

Only the name and ticker are required. Everything else about the pool is fixed for every launch, so buyers always know the rules.

Field	Required	Notes
Name	Yes	Up to 32 characters. Shown everywhere your token appears.
Ticker	Yes	2 to 10 letters or digits. Permanent once launched.
Image	Recommended	PNG, JPG, GIF or WebP under 2MB, or an https / ipfs link.
Pair asset	Default USDC	USDC on Elysium, ETH on Robinhood Chain, a stock, or up to 5 quotes.
Pool fee	Default 3%	2%, 3%, 4% or 5%. Frozen at launch.
Agent mode	Optional	Routes your 10% creator stream into $GUST compute.
First buy	Optional	Buy in the same transaction, before anyone else.

3. Launch and share

Hit launch and confirm in your wallet. Your token is tradable within one block. Under the hood, the factory deploys the token, its pool and its treasury in a single call:

UpdraftFactory.sol

factory.createToken(
  "Thermal", "THERMAL",       // name, ticker
  metadataURI,                // image, description, links
  creator,                    // receives the 10% creator stream
  30000,                      // 3% pool fee, frozen
  []                          // optional burn sinks (max 3)
);  // → token, treasury, locked v4 position

Tickers and images are permanent

Double-check spelling before you confirm. None of the metadata can be edited after the transaction confirms — nobody, including us, can change it later.

What the transaction does

All of it happens, or none of it does.

Deploy the token. An ERC-20 with 18 decimals and a fixed supply of 1,000,000,000. There is no mint function, no owner, and no transfer restriction other than the rebate rules. A sale or a send to a normal wallet disqualifies that wallet from future rebates. A burn to the dead address does not.
Create the pool. A Uniswap v4 pool, no hook, tick spacing 10. The fee in the pool key is the fee you froze: 2%, 3%, 4%, or 5%, written as 20000, 30000, 40000, or 50000. The default is 3%.
Place the whole supply. One liquidity position, initialised so the market cap is about $5,000. The position holds tokens and no quote. See The open.
Lock the position. The NFT goes to UpdraftLocker. Collecting fees is a decrease of zero liquidity, which is how Uniswap pays owed fees without touching the principal. The locker has no function that transfers the position out or removes that liquidity.
Bind a treasury. That treasury is this token’s only. The 30/30/15/15/10 split is copied in and does not change. The creator / agent recipient is required. The zero address is rejected.

Which pool you open

One pair

On Elysium you can launch against native $HYPE (1-click, no approve), 6-decimal USDC, kHYPE, or $KNTQ.

Phase 2: upTICKER Equity Pairs

Several quotes

A multi launch opens up to five pools in one transaction and splits the supply evenly. Each pool opens at the same price, so the token has one opening market cap, spread over several books.

What you can change later

Get started

Launch your first token

Everything you need to go from idea to a live, protected token. It's free, it takes about a minute, and there are no settings you can get wrong.

Launching costs $0

You only pay gas. Opening a market carries no protocol fee — Updraft earns from its share of the pool fee once your token trades.

1. Fund your wallet

You need a little gas, plus whatever you want for your optional first buy. If your funds are on HyperEVM, the Fast Bridge moves them over in a few seconds with no fee.

Fast BridgeHyperEVM → Elysium · 0% fee · ~3 seconds

2. Fill in the basics

Only the name and ticker are required. Everything else about the pool is fixed for every launch, so buyers always know the rules.

Field	Required	Notes
Name	Yes	Up to 32 characters. Shown everywhere your token appears.
Ticker	Yes	2 to 10 letters or digits. Permanent once launched.
Image	Recommended	PNG, JPG, GIF or WebP under 2MB, or an https / ipfs link.
Pair asset	Default USDC	USDC on Elysium, ETH on Robinhood Chain, a stock, or up to 5 quotes.
Pool fee	Default 3%	2%, 3%, 4% or 5%. Frozen at launch.
Agent mode	Optional	Routes your 10% creator stream into $GUST compute.
First buy	Optional	Buy in the same transaction, before anyone else.

3. Launch and share

Hit launch and confirm in your wallet. Your token is tradable within one block. Under the hood, the factory deploys the token, its pool and its treasury in a single call:

UpdraftFactory.sol

factory.createToken(
  "Thermal", "THERMAL",       // name, ticker
  metadataURI,                // image, description, links
  creator,                    // receives the 10% creator stream
  30000,                      // 3% pool fee, frozen
  []                          // optional burn sinks (max 3)
);  // → token, treasury, locked v4 position

Tickers and images are permanent

Double-check spelling before you confirm. None of the metadata can be edited after the transaction confirms — nobody, including us, can change it later.

What the transaction does

All of it happens, or none of it does.

Deploy the token. An ERC-20 with 18 decimals and a fixed supply of 1,000,000,000. There is no mint function, no owner, and no transfer restriction other than the rebate rules. A sale or a send to a normal wallet disqualifies that wallet from future rebates. A burn to the dead address does not.
Create the pool. A Uniswap v4 pool, no hook, tick spacing 10. The fee in the pool key is the fee you froze: 2%, 3%, 4%, or 5%, written as 20000, 30000, 40000, or 50000. The default is 3%.
Place the whole supply. One liquidity position, initialised so the market cap is about $5,000. The position holds tokens and no quote. See The open.
Lock the position. The NFT goes to UpdraftLocker. Collecting fees is a decrease of zero liquidity, which is how Uniswap pays owed fees without touching the principal. The locker has no function that transfers the position out or removes that liquidity.
Bind a treasury. That treasury is this token’s only. The 30/30/15/15/10 split is copied in and does not change. The creator / agent recipient is required. The zero address is rejected.

Which pool you open

One pair

On Elysium you can launch against native $HYPE (1-click, no approve), 6-decimal USDC, kHYPE, or $KNTQ.

Phase 2: upTICKER Equity Pairs

Several quotes

A multi launch opens up to five pools in one transaction and splits the supply evenly. Each pool opens at the same price, so the token has one opening market cap, spread over several books.